Medical care robots being made with 3D origami in B.C. lab

The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)
This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)

A B.C. professor would like to see a robot take your vitals when you visit a doctor in the somewhat near future.

Dr. Woo Soo Kim, associate professor of mechatronic systems engineering at Simon Fraser University, has developed health care robots that can measure heart rate, respiration rate, temperature and oxygen levels. The oxygen level measurement in particular could be used to monitor severe COVID-19 patients.

He hopes the sensor robots can support doctors and nurses, and is currently using two prototypes to collaborate with a team of Vancouver Coastal Health researchers on how a technology like this could be applied in practice.

There’s a lot to be worked out — including how comfortable will patients be receiving care from a robot – but Kim hopes to have sensing robots in health care in five to 10 years. He imagines a full complement of medical care robots, including passive bots that take vitals, companion bots that would hang out with patients to regularly monitor vitals so people don’t need to wear an uncomfortable device, and even receptionist bots.

We might already be warming up to machine-based medical care, as a recent report indicated most British Columbians now prefer virtual meetings with their doctors for routine check ups.

READ MORE: Majority of British Columbians now prefer routine virtual doctor’s visits: study

His lab, Additive Manufacturing in SFU’s Surrey campus, has been working on advanced 3D printing, wearable technology and sensing robots since he arrived in 2010, and narrowed their focus health care uses in 2018. He works with six to seven students and interns.

Now they have two working prototypes to take to doctors and nurses. One is an arm, completely made in the lab with 3D printed origami. The second machine is a shiny, white humanoid that Kim’s lab has added on their own hand with highly specialized electron sensors.

The origami design was chosen not just because it’s cool. His lab has spent years testing various architectural solids with 3D printing, and found that “3D origami structures have naturally less fatigue characteristics with re-configurable structures. So, it’s good if they are used for bending structures such as our fingers,” Kim said.

Funding has been partially provided by the Natural Sciences and Engineering Research Council of Canada, and the lab is applying for more grants to expand development.

The first stage of robotic health care is passive, with the machines gathering information and sharing results with human health care professionals, but Kim envisions future machines that could be more involved.

Do you have something to add to this story or something else we should report on? Email: zoe.ducklow@blackpress.ca


BC HealthScience

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Williams Lake city councillor Sheila Boehm wants to see allied health providers such as chiropractors or physiotherapists have access to medical records. (Monica Lamb-Yorski file photo - Williams Lake Tribune)
Allied health providers need access to medical records: Williams Lake city councillor

Sheila Boehm has penned a resolution for consideration at the upcoming NCLGA convention

The artwork of several Mountview Elementary School students is currently on display downtown in Williams Lake at Cariboo Art Beat. (Photo submitted)
Imaginations, creativity of Mountview students on display at Cariboo Art Beat

Cariboo Art Beat is located at 19 1st Ave. on Oliver Street

Carole Martin of Williams Lake has multiple sclerosis and has found solace in writing books. Her latest is a novella titled The Secret Life of Jack. (Photo submitted)
Living with MS subject of local woman’s books

Carole Martin has had multiple sclerosis for 25 years

Cariboo Art Beat is hosting a month-long Mother’s Day Artisan Market at its location on Oliver Street featuring the crafts, artwork and goods of upwards of 20 community vendors. (Photos submitted)
Month-long, Mother’s Day Artisan Market starts April 9 at Cariboo Art Beat

The call for interest has grown to 22 participating vendors

Work is slated to get underway June 1 on a foundation replacement at the Potato House in Williams Lake. The project is possible due to a $449,000 Community Economic Recovery Infrastructure Program (CERIP) grant. (Angie Mindus photo - Williams Lake Tribune)
Potato House Project to break ground this summer on restoration, rehabilitation work

This project involves lifting the house to remove the current, failing foundation and replacing it

B.C. Health Minister Adrian Dix and Premier John Horgan describe vaccine rollout at the legislature, March 29, 2021. (B.C. government)
1,262 more COVID-19 infections in B.C. Friday, 9,574 active cases

Province’s mass vaccination reaches one million people

Cannabis bought in British Columbia (Ashley Wadhwani/Black Press Media)
Is it time to start thinking about greener ways to package cannabis?

Packaging suppliers are still figuring eco-friendly and affordable packaging options that fit the mandates of Cannabis Regulations

Two-year-old Ivy McLeod, seen here on April 9, 2021 with four-year-old sister Elena and mom Vanessa, was born with limb differences. The family, including husband/dad Sean McLeod, is looking for a family puppy that also has a limb difference. (Jenna Hauck/ Chilliwack Progress)
B.C. family looking for puppy with limb difference, just like 2-year-old Ivy

Ivy McLeod born as bilateral amputee, now her family wants to find ‘companion’ puppy for her

A vehicle that was driven through the wall of a parkade at Uptown Shopping Centre and into the nearby Walmart on April 9 was removed through another hole in the wall later that night. (Photo via Saanich Police Department and Ayush Kakkar)
Vehicle launched into B.C. Walmart removed following rescue of trapped workers

Crews cut new hole in parkade wall to remove vehicle safely

Four members with Divers for Cleaner Lakes and Oceans were out at Cultus Lake on March 28 and 29 hauling trash out of the waters. (Henry Wang)
PHOTOS: Out-of-town divers remove 100s of pounds of trash from Cultus Lake

Members of Divers for Cleaner Lakes and Oceans hauled out 470 pounds of trash over two days

As of Saturday, April 10, people born in 1961 are the latest to be eligible for a COVID-19 vaccine. (Black Press files)
B.C. residents age 60+ can now register to get their COVID-19 vaccine

Vaccine registration is now open to people born in 1961 or earlier

A new saline gargle test, made in B.C., will soon be replacing COVID-19 nasal swab tests for kids. (PHSA screenshot)
Take-home COVID-19 tests available for some B.C. students who fall ill at school

BC Children’s Hospital plans to provide 1,200 kits to Vancouver district schools this April

Ruming Jiang and his dog Chiu Chiu are doing fine following a brush with hypothermia that saw several people work together to get them out of the Fraser River near Langley’s Derby Reach Park on March 25, 2021 (Special to the Advance Times)
Man finds men who rescued him from drowning in B.C.’s Fraser River

A grateful Ruming Jiang says he will thank them again, this time in person when the pandemic ends

Tyson Ginter, 7, is proud of his latest Hot Wheels he recently received by Quesnel RCMP Const. Matt Joyce. (Photo submitted)
B.C. Mountie handing out toy cars to light up children’s faces

‘A lot of times it will be the only interaction they have with the police,’ says Const. Matt Joyce

Most Read